A home test for the rapid qualitative detection of SARS-CoV-2 virus antigen in anterior nasal swabs within 7 days of symptom onset.
Product Specifications:
- CE approved in April 2021
- Five tests per kit
- Results in 15-20 minutes
- Sensitivity: 96.77%
- Specificity: 99.20%
- Accuracy: 98.72%
How To Use:</
A home test for the rapid qualitative detection of SARS-CoV-2 virus antigen in anterior nasal swabs within 7 days of symptom onset.
Product Specifications:
- CE approved in April 2021
- Five tests per kit
- Results in 15-20 minutes
- Sensitivity: 96.77%
- Specificity: 99.20%
- Accuracy: 98.72%
How To Use:
- Performing The Test Rotate the lid of sample extraction buffer bottle.
- Caution: Open it away from your face and be careful not to spill any of the liquid.
- Squeeze all extraction buffer out of the bottle into the extraction tube.
- Caution: Avoid touching the bottle against the tube.
- Identify the soft, fabric tip of the swab.
- Peel open the swab packaging and gently take out the swab.
- Caution: Never touch the soft, fabric tip of the swab with your hands.
- Carefully insert swab into one nostril.
- The swab tip should be inserted no less than 2.5 cm (1 inch) from the edge of the nostril.
- Roll swab 3-4 times along the mucosa inside the nostril. Leave swab in the nostril for several seconds. Using the same swab, repeat this process for the other nostril.
- Withdraw swab from the nasal cavity.
- Caution: This may feel uncomfortable.
- Do not insert the swab any deeper if you feel strong resistance or pain.
- Place swab into extraction tube. Roll swab three to five (3-5) times.
- Leave swab in extraction buffer for 1 minute.
- Pinch extraction tube with fingers and remove the solution from swab as much as possible. Install the nozzle cap onto the sample extraction tube tightly.
- Bring the kit components to room temperature before testing.
- Open the pouch and remove the card.
- Place the card on a flat and level surface.
- Caution: Once opened, the test card must be used immediately.
- Invert the extraction tube and add 3 drops of test specimen into the specimen well (S) by gently squeezing the extraction tube.
- Caution: The formation of air bubbles in the specimen well (S) must be avoided.
- Read the results after 15-20 minutes.
- Caution: Results after 20 minutes may not be as accurate.
Reading Antigen Test Results Positive:
- If two colored bands appear with one colored band in the Control Zone (C) and another in the Test Zone (T) within 15-20 minutes, the test result is positive.
- Caution: No matter how faint the colored band is in the Test Zone (T), the result should be considered as positive.
- Negative: If one colored band appears in the Control Zone (C) and no colored band appears in the Test Zone (T) within 15-20 minutes, the test result is negative.
- Invalid: If no color line appears in the control area (C) within 15-20 minutes, the test is invalid. Repeat the test with a new test card.
Read More
